Back to controllers
M-02 / Controller model
MO 690 H2X
Power FET I/O · CAN-bus module with six 10 A high-side outputs
MO 690 H2X is an economical CAN-bus power output module for switching heavy loads on commercial and off-road machines. Six self-protected high-side outputs of up to 10 A each, each with its own battery supply pin, and nine digital inputs connect through a single 24-pin connector.
- I/O
- Power Output Module
- Connector
- 24 Pin Connector
- Supply
- 8~32 VDC
Overview
Heavy loads, switched over CAN.
Highlights
- User programmable option New
- 6 high-side outputs, up to 10 A per channel
- Self-protected smart power switches: overload, short-circuit and overtemperature shut-down
- Freewheeling diode on every output for inductive loads
- Separate battery supply pin for each output channel
- 9 active-high digital inputs
- Overvoltage protection up to 36 VDC via TVS diodes
Specifications
- Communication
- SAE J1939 (CAN 2.0A/2.0B), UDS (ISO 14229) protocol
- Operating Voltage
- 8~32 VDC
- Connector
- 24 Pin Connector (2x12, 4.2 mm pitch)
- I/O Class
- Power Output Module
Order Code
Build the order code from its segments
Pick one option from each column of the table and join them with dashes — the result is the code to quote when you order.
- MO 690
- H2X
- SXXXX
X stands for the digits you pick from the table.
| MO 690 - | H2X - Hardware | SXXXX Software |
|---|---|---|
| H20 - 9 Active-High Inputs, 6 High-Side Outputs | S1000 - Default |
* Available upon request with minimum order quantity.
Example:
- MO 690.H20.S1000
- 9 Active-High Inputs, 6 High-Side Outputs Power Output Module with SAE J1939 interface.
Need a custom configuration?
Contact EngineeringTell our engineering team about your machine platform and signal requirements. We'll propose the right hardware variant and software baseline.