Throttle pedals, control levers and rotary inputs that swap mechanical potentiometers for hall-effect sensing — cleaner signal, no contact wear and ergonomics tuned for long shifts in tough cabs.
Electronic pedals and control levers share Makersan's contactless hall-effect signal stack and sealed mechanical platform — mix-and-match across a single cab without re-engineering the harness or the calibration tooling.
MO 126 is a heavy-duty suspended accelerator pedal for commercial and off-road vehicles. A contactless measuring principle and two independent return springs deliver a long, maintenance-free service life, while full redundant programmable outputs adapt the pedal to different engine interfaces.
MO 129 is a floor-type accelerator pedal for commercial and off-road vehicles, available in long, short and long-wide treadle variants with four initial treadle angles. Contactless sensing and full redundant programmable outputs keep the signal clean across the working range.
MO 367 is a bidirectional rocker pedal for commercial and off-road vehicles, with two independent springs for each direction of travel. The contactless sensor and full redundant programmable outputs support standard, hydraulic and lock connection types.
MO 370 is a lightweight suspended accelerator pedal in a 30% glass-fibre reinforced polyamide case, for passenger, commercial and off-road vehicles. It offers single- or double-sensor configurations with full redundant programmable outputs.
MO 372 is a compact suspended accelerator pedal in a 30% glass-fibre reinforced polyamide case, for passenger, commercial and off-road vehicles. Single- or double-sensor configurations and full redundant programmable outputs cover a wide range of engine interfaces.
MO 381 is a suspended electronic clutch pedal for commercial and off-road vehicles, suitable for different engine interfaces. A contactless measuring principle and full redundant programmable outputs provide reliable clutch-position feedback.
MO 382 is a tractor accelerator pedal for agricultural and off-road vehicles, available in four configurations — right-side suspended (A), right-side underfloor (B), left-side underfloor (C) and left-side suspended (D). Contactless sensing with full redundant programmable outputs and horizontal or vertical sensor positioning.
MO 383T is a suspended accelerator pedal for agricultural tractors and off-road vehicles, suitable for different engine interfaces. Contactless sensing with full redundant programmable outputs and customisable rod types on request.
MO 368A is an underfloor floor-type accelerator pedal in a 30% glass-fibre reinforced polyamide case, for passenger, commercial and off-road vehicles. It adds extended analog output options (0-5V / 0-10V / 4-20mA / PWM) to the contactless, double full-redundant platform.
MO 368B is an underfloor floor-type accelerator pedal in a 30% glass-fibre reinforced polyamide case, for passenger, commercial and off-road vehicles. A variant of the 368 underfloor family with the same contactless, double full-redundant output platform.
MO 368C is an underfloor floor-type accelerator pedal in a 30% glass-fibre reinforced polyamide case, for passenger, commercial and off-road vehicles. A variant of the 368 underfloor family with the same contactless, double full-redundant output platform.
MO 369 is a suspended accelerator pedal in a 30% glass-fibre reinforced polyamide case, for passenger, commercial and off-road vehicles. It pairs the contactless double full-redundant platform with extended analog output options.
MO 375A is an electronic rotary hand throttle / valve control with a 100° working angle, 10-stage detents and 100° friction hold. The contactless sensor offers single or double full-redundant programmable outputs over CAN, analog or PWM.
MO 376 is an electronic rotary control lever with a 90° or 180° programmable angle at 0.1° resolution. Available as a button (MO 376A) or handle (MO 376C) actuator, with contactless full-redundant double-die hall sensing.
MO 378 is an electronic rotary control lever with a 60° programmable angle at 0.1° resolution. Front, sub and opposite mounting options and contactless full-redundant double-die hall sensing suit it to a wide range of throttle and valve linkages.
MO 378M is an electronic rotary control lever with a 45° programmable angle at 0.1° resolution. Standard or right-angle bracket options and contactless full-redundant double-die hall sensing over CAN, analog or PWM.
MO 378N is an electronic rotary control lever with a 45° programmable angle at 0.1° resolution, rated for more than 5 million lifetime cycles. Contactless full-redundant double-die hall sensing with CAN, analog and IVS outputs.
MO 378S is an electronic rotary control lever with a 45° programmable angle at 0.1° resolution, available without a lever, with a double-sided bracket, or with a grip. Contactless full-redundant double-die hall sensing over CAN, analog or PWM.
MO 379 is an electronic rotary control with 90°, 180° or detented programmable angles at 0.1° resolution. Plate, knob and shaft options and contactless full-redundant double-die hall sensing make it a flexible cab-mounted control element.
From floor-mount and suspended accelerator pedals to rotary hand-throttles and control levers, Makersan modules deliver consistent, contactless position feedback through the full stroke.
Identical sensing, sealing and output options across the full input range — specify one harness and one tuning tool for the entire cab.
Specified on commercial vehicles, construction and agricultural machinery, marine craft and material-handling equipment. Send us your duty cycle and we'll spec the right pedal, lever or rotary unit.
